Workbenches

What things would you use at the maker shop?
User avatar
darus67
Posts: 194
Joined: Fri Jan 30, 2009 1:54 am
Location: Coon Rapids

Re: Workbenches

Postby darus67 » Wed Jan 20, 2010 10:58 am

Where do they need to be moved from, and when?
I have a minivan.

uptownmaker
Posts: 378
Joined: Tue Jan 13, 2009 8:26 am

Re: Workbenches

Postby uptownmaker » Wed Jan 20, 2010 11:16 am

I'll plan to bring some of my tools tonight- cordless drill/driver, cheapo bit-kit, corded drill/driver, circ saw, and if I can get it back, my cheapo compound miter saw. I'll also bring some of the more auspicious pieces of surface-like material I have in the garage, and the leftover screws from my garden bed build.

meat_raffle
Posts: 47
Joined: Wed Jan 14, 2009 10:01 am

Re: Workbenches

Postby meat_raffle » Wed Jan 20, 2010 11:27 am

Not sure I can make it tonight. School board meeting and CPR training.
I guess it depends on how long the training goes.

I did leave 5 pound boxes of 2-1/2' and 1-5/8" drywall screws on a shelf. Along with a couple of #2 phillips screw bits to help with the bench builds.

I also left a mess of paint cans under the metal bench near the office as well as a drop cloth on the floor.
Was in a bit of a rush to get home after the painting on Monday and didn't want to transport them home until they dried a bit.
I will make those go away the next time I'm at the space.
-mark-

User avatar
metis
Posts: 1219
Joined: Wed Jan 14, 2009 10:06 am
Location: NE Minneapolis
Contact:

Re: Workbenches

Postby metis » Wed Jan 20, 2010 11:56 am

hollering via PM

User avatar
darus67
Posts: 194
Joined: Fri Jan 30, 2009 1:54 am
Location: Coon Rapids

Re: Workbenches

Postby darus67 » Wed Jan 20, 2010 11:32 pm

We almost got a workbench done tonight.
We did get all the pieces for at least 4 benches cut.

I added some pictures to the group Flickr pool
http://www.flickr.com/groups/1043068@N22/

User avatar
swinkdaddy
Posts: 319
Joined: Tue Mar 17, 2009 5:06 pm
Location: Minneapolis, MN
Contact:

Re: Workbenches

Postby swinkdaddy » Thu Jan 21, 2010 9:54 am

Do we want to set up a time this weekend to finish up the benches?
Have kilt, will travel...

User avatar
metis
Posts: 1219
Joined: Wed Jan 14, 2009 10:06 am
Location: NE Minneapolis
Contact:

Re: Workbenches

Postby metis » Fri Jan 22, 2010 3:28 pm

this weekende is a zoo for me. art shantys and all. (you should all stop out and see them they rock. we(as a group) have to do one of these next year. really this time. matt and i worked on tiny shanty (i came in a bit late, but it's a bucket of fun) i could prolly be conned into coming in another weekday next week. the lower supports need to be cut yet, btu that can't happen until the uppers have legs on them (irregular legs). i'd like to swap out the non rustic ends for the rustic ones on the rustic bench.


slept terribly last night, if i'm awake, i could swing by today during the geekery and screw a few together if anyone want's to help with that maybe 8pmish.

User avatar
swinkdaddy
Posts: 319
Joined: Tue Mar 17, 2009 5:06 pm
Location: Minneapolis, MN
Contact:

Re: Workbenches

Postby swinkdaddy » Tue Feb 02, 2010 9:00 pm

(Thread bump) Anyone with some free time this Wen meeting, we could use some help finishing up those work benches.
Have kilt, will travel...

User avatar
metis
Posts: 1219
Joined: Wed Jan 14, 2009 10:06 am
Location: NE Minneapolis
Contact:

Re: Workbenches

Postby metis » Wed Feb 03, 2010 3:40 pm

i'll be there. some errands to run then feed then factory.


Return to “Uses/Equipment”

Who is online

Users browsing this forum: No registered users and 2 guests