Site Logo

 
It is currently Tue Jul 22, 2014 1:23 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Metal Casting Group - looking for interested folks
PostPosted: Thu Jul 18, 2013 1:51 pm 
Offline
User avatar

Joined: Sun Mar 15, 2009 9:10 am
Posts: 96
Location: Golden Valley
Myself and another member are looking to start a Metal Casting Group and we're looking for more members. I know there are several other members that have done casting in the past, we'd really like you to join us or at least lend us your knowledge. We're probably going to start with aluminum, but I hope to work up to maybe steel and some alloys, but we'll see how it goes.

I believe we have several small foundries and burners available, with more in the works, I think we need crucibles and handling tools, though.

Last year I had contacted a couple local foundries about acquiring some of their used green sand and was told to bring a bucket or a truck and take as much as I wanted. I'll have to get in touch with them and make sure the offer is still open.

One of the things I'm excited to try is using my 3D printer to create lost investment moulds.

Let me know if you're interested.

Jon

_________________
Instructables is my crack.

You can't have Success without the suck.

Too many irons, not enough fire.


Top
 Profile  
 
 Post subject: Re: Metal Casting Group - looking for interested folks
PostPosted: Sat Jul 20, 2013 8:41 pm 
Offline
User avatar

Joined: Wed Mar 21, 2012 3:59 pm
Posts: 101
I cast using aluminum years ago using styrofoam and sand. I've been thinking of trying some things in pewter more recently, but am not sure where one would get the pewter. I have some of that PVA filament for my 3-D printer that dissolves in water/steam. So I was thinking of trying that to make a cast. I've also done some lost wax casting in the past. I wonder if it is possible to rig up a 3D printer to print using wax?

- Doug

P.S. I can tell you that this TC Maker Forum has fallen into almost no use by the members. Almost no one uses it or posts on here anymore. Not sure why that is.


Top
 Profile  
 
 Post subject: Re: Metal Casting Group - looking for interested folks
PostPosted: Mon Jul 22, 2013 10:27 am 
Offline
User avatar

Joined: Sun Mar 15, 2009 9:10 am
Posts: 96
Location: Golden Valley
Doug,

Thanks for posting. I know most members don't come here anymore, but I'd really like to try and turn that around. Where else can you find pertinent topics in an easily laid out format? Or, maybe folks don't have that much to say? I find that hard to believe.

I'm interested in learning more about the PVA filament, might be a good solution. Some of the videos I've seen have used PLA and then 45 minutes of melting it out over the foundry before doing the pour. For wax I would think one could design a heated tube and plunger setup and a chilled environment.

There must be a supplier of pewter locally. I want to start out with some really basic casting and get comfortable with doing the pours then I'll start expanding into the 3d printed investment casting.

-Jon

_________________
Instructables is my crack.

You can't have Success without the suck.

Too many irons, not enough fire.


Top
 Profile  
 
 Post subject: Re: Metal Casting Group - looking for interested folks
PostPosted: Wed Aug 14, 2013 1:47 pm 
Offline
User avatar

Joined: Sun Mar 15, 2009 9:10 am
Posts: 96
Location: Golden Valley
I'm going to try and touch base tonight with a few of the members that expressed interest in a casting group and see if we can't get a more formal group together.

I'm going to be building a new burner similar to Steve's which will make my rig more portable since I won't need a fan, and I think it's give me better control of the flame.

I'm also going to try 3D printing some TC Maker logos and casting them in aluminum to make lapel pins. Hopefully this will happen sooner than later.

All we really need at this point are some good crucibles, tongs and green sand.

_________________
Instructables is my crack.

You can't have Success without the suck.

Too many irons, not enough fire.


Top
 Profile  
 
 Post subject: Re: Metal Casting Group - looking for interested folks
PostPosted: Thu Jul 03, 2014 10:43 am 
Offline

Joined: Sun Feb 26, 2012 12:51 am
Posts: 9
I'm interested! I've got a few waxes that are ready to go if I can get access to some silver and a casting aparatus that's suitable for them.

What do we need right now? Crucibles? Sand? I know you can mix your own green sand and if anyone is qualified to work with one of the forges tongs can be made.

Maybe have a sit-down meeting some time soon?


Top
 Profile  
 
 Post subject: Re: Metal Casting Group - looking for interested folks
PostPosted: Mon Jul 07, 2014 11:04 am 
Offline
User avatar

Joined: Sun Mar 15, 2009 9:10 am
Posts: 96
Location: Golden Valley
We can get green sand from several of the foundries around town. I don't have a crucible, and I'd like to get a better working burner than the one I have. I think Steve's foundry, though huge, has a crucible. Maybe I can whack one together out of some steel pipe and a bit of plate. My foundry is only really for aluminum.

I'd still like to have a meet up and see if we can get something going. It's been far too long since I last spoke to anyone about this.

_________________
Instructables is my crack.

You can't have Success without the suck.

Too many irons, not enough fire.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL Flash Games