FS: Hakko 936, SFE hot air station, Segger J-Link EDU, etc.

Post here for selling, buying, or trading local goods and services
blkcat
Posts: 3
Joined: Sat Jan 05, 2013 9:49 pm

FS: Hakko 936, SFE hot air station, Segger J-Link EDU, etc.

Postby blkcat » Sat Jan 05, 2013 10:08 pm

Hey guys,

Looking to clear out the bulk of my electronics gear - with a new job and a smaller apartment I simply don't have the time or space to justify keeping it all around anymore. Here's what I've got:

* Hakko 936 station w/ iron, gently used (bought in college and still using original tip; one replacement tip and some replacement sponges included)
* SparkFun 303D hot-air rework station, very gently used - stripped a few boards and that's about it
* Segger J-Link EDU debugger

Along with a rubbermaid FULL of miscellaneous kit. Adafruit SMD resistor and capacitor books (0605), many many microprocessors (Cortex-M0/M3, PIC24, AVR) and other parts from Digi-Key orders, probably a dozen HD44780 LCDs, breadboards, Chip-Quik solder, assorted solder braids... this is about four years' worth of accumulated hobbyist goodies.

Not sure what to ask for it all - there's probably $400+ in equipment and parts here. Make me an offer?
Last edited by blkcat on Thu Jun 13, 2013 11:13 am, edited 1 time in total.

User avatar
smittex
Posts: 189
Joined: Sat Apr 23, 2011 11:07 am

Re: FS: Hakko 936, SFE hot air station, Segger J-Link EDU, e

Postby smittex » Sun Jan 06, 2013 8:06 pm

I'm interested on the controllers. What are their costs?

blkcat
Posts: 3
Joined: Sat Jan 05, 2013 9:49 pm

Re: FS: Hakko 936, SFE hot air station, Segger J-Link EDU, e

Postby blkcat » Mon Jan 07, 2013 4:26 pm

I would greatly prefer to sell as much of it in a lot as I can, but if I don't get any bites I'll try to part those out for you.

blkcat
Posts: 3
Joined: Sat Jan 05, 2013 9:49 pm

Re: FS: Hakko 936, SFE hot air station, Segger J-Link EDU, e

Postby blkcat » Fri Jan 11, 2013 2:38 am

Had a couple of nibbles but no sure takers thus far - I'd really prefer not to try and dump all of this stuff piecemeal on eBay if I can help it. Let's make a deal!

User avatar
smittex
Posts: 189
Joined: Sat Apr 23, 2011 11:07 am

Re: FS: Hakko 936, SFE hot air station, Segger J-Link EDU, e

Postby smittex » Fri Jan 11, 2013 3:41 pm

$30 for the mcus and lcds.


Return to “Local Classifieds”

Who is online

Users browsing this forum: No registered users and 1 guest