I will be in around 6:30 and will set up on Ray's old desk. Hopefully I can do a test call before 7.

As far as the meeting goes, my understanding is that we're starting at 7 and unless Metis takes over it should be over relatively quickly.

At 7:45 we should be ready to go for the show. We're going to demo Spoonapult, 10X and Adam's new blinky kit so I'll need Metis, Mike, and Adam hanging out until our segment is done.

(I'm thinking we should do around 1 minute on Spoonapult, 1 minute on blinky, and the rest of the time (~3-4 minutes) on 10X because it requires more time to explain.

I'm thinking of blocking off the woodshop door just to minimize walk-through.

I think this can be done by blocking access to the garage area and having people use the front door for access to the rest of the space / classroom(family room)

I hate to say it, I don't seeing the meeting being over fast at all.

The opposite, in fact.

Just sayin'.

I think the meeting is going to be up front in the Air Conditioning.

jwb, well done on the tubes this eve. thanks much for your effort on this, i think it all came out nicely.

I missed catching our segment on the show, I'll have to get it when the recorded version is out.