TIG orentation class

Topics generally related to Twin Cities Maker activities
User avatar
swinkdaddy
Posts: 319
Joined: Tue Mar 17, 2009 5:06 pm
Location: Minneapolis, MN
Contact:

TIG orentation class

Postby swinkdaddy » Mon Nov 07, 2011 4:42 pm

Date: Sunday Dec 4th
Time: 12pm - 4pm

Cost: $80 (includes your own tungsten kit and gas usage fee)

The good news - The big blue miller is up and running. And it is totally sweet to weld with.
The bad news - This machine is REALLY powerful (it can draw 22,000 watts of energy @ 96A) and very different than MIG welding.

That means you need to have a good understanding of welding and have a fair amount of skill before you should attempt to move on to TIG welding. This unit is water-cooled and you can damage it by forgetting small thing like forgetting to turn on the pump. So we need to be SURE everyone has been given the proper startup and shutdown procedures. Also for simplicity sake, we want everyone to use the same collet/tungsten electrode kit rated for this welder, so you will be getting your own kit will be part of the orientation materials (dont worry we get a good discount on bulk orders so its cheaper than getting it yourself). Also this unit uses quite a bit of argon. We want to make sure we can keep this thing in gas, so we trying to get a shop sized tank. The rest of the orientation cost goes right back into feeding this beast a steady diet of argon.

This will not be an introduction to welding class. You will need to have had a mig or gas welding class before signing up and be a member in good standing of the Hack Factory. You can also test out by finding either Dave or I and showing off your wicked welding skills.
Last edited by swinkdaddy on Tue Nov 08, 2011 10:15 pm, edited 2 times in total.
Have kilt, will travel...

User avatar
karinf22
Posts: 100
Joined: Thu Feb 17, 2011 7:23 pm
Location: my parents' basement

Re: TIG orentation class

Postby karinf22 » Tue Nov 08, 2011 11:41 am

Shall I set up an eventbrite and put this on the calendar?

User avatar
karinf22
Posts: 100
Joined: Thu Feb 17, 2011 7:23 pm
Location: my parents' basement

Re: TIG orentation class

Postby karinf22 » Tue Nov 08, 2011 2:12 pm


User avatar
karinf22
Posts: 100
Joined: Thu Feb 17, 2011 7:23 pm
Location: my parents' basement

Re: TIG orentation class

Postby karinf22 » Tue Nov 08, 2011 8:20 pm

Due to scheduling issues we need to move the class to Sunday Dec 4th 12pm - 4pm. Saturday is the Seward Community Art Crawl will be taking place and we will be having our doors open to public.

KellyM
Posts: 30
Joined: Fri Dec 31, 2010 10:06 am

Re: TIG orentation class

Postby KellyM » Sun Dec 04, 2011 8:33 am



Return to “General Discussion”

Who is online

Users browsing this forum: Bing [Bot], Exabot [Bot], Google [Bot] and 2 guests

cron