PIC10F Cap Touch Board/MCP1650 White LED Board

Links and information on projects by local makers
bdsimmons2
Posts: 12
Joined: Wed Jan 14, 2009 1:35 pm

PIC10F Cap Touch Board/MCP1650 White LED Board

Postby bdsimmons2 » Mon Oct 12, 2009 1:48 pm

Anybody used one of these before?
any good places on the web for programming help?
Thanks

uptownmaker
Posts: 378
Joined: Tue Jan 13, 2009 8:26 am

Re: PIC10F Cap Touch Board/MCP1650 White LED Board

Postby uptownmaker » Mon Oct 12, 2009 5:22 pm

PIC related stuff can benefit greatly from a subscription to the PICList- a free mailing list hosted by MIT which, while nominally PIC centered, has a great deal of other info as well.

Microchip also has a good web forum.

Do you have a programmer for the 10F?

User avatar
paulsobczak
Site Admin
Posts: 861
Joined: Sun Jan 11, 2009 6:35 pm
Contact:

Re: PIC10F Cap Touch Board/MCP1650 White LED Board

Postby paulsobczak » Mon Oct 26, 2009 8:58 am

never heard about the MIT mailing list, I imagine that it's a good resource. With the PIC stuff I know it's hard right away but it's worth your time to go straight to the manual for information. I know there is load of information there but the sooner you understand what is going on the easier it will be to reference the manual.

I have worked with the 16F and the dsPIC series both successfully.

http://themountainfold.com/?p=24
http://themountainfold.com/?p=290

User avatar
paulsobczak
Site Admin
Posts: 861
Joined: Sun Jan 11, 2009 6:35 pm
Contact:

Re: PIC10F Cap Touch Board/MCP1650 White LED Board

Postby paulsobczak » Mon Oct 26, 2009 9:32 am


bdsimmons2
Posts: 12
Joined: Wed Jan 14, 2009 1:35 pm

Re: PIC10F Cap Touch Board/MCP1650 White LED Board

Postby bdsimmons2 » Thu Dec 10, 2009 12:31 pm

no action on this yet, since these guys were backordered at the time that I won them from MAKE... so I haven't seen hide nor hair of it yet. Thanks for the resources, I'll be checking there soon. Do i need a programmer for the 10F? I thought this was a "plug & play" type of setup that I could program via USB. Although I've been known to be wrong before...

uptownmaker
Posts: 378
Joined: Tue Jan 13, 2009 8:26 am

Re: PIC10F Cap Touch Board/MCP1650 White LED Board

Postby uptownmaker » Thu Dec 10, 2009 6:48 pm

Do you have a part number for the kit?


Return to “Local Maker Projects”

Who is online

Users browsing this forum: No registered users and 2 guests

cron